POWER TRUNK LID SYSTEM OPERATION CHECK


  1. CHECK BASIC OPERATIONS


    1. Power trunk lid operation conditions.


      1. Operation conditions when the power switch is on (IG):


        • The power trunk lid "PBD Power Operation" customization function is set to "ON".

        • The vehicle speed is 3 km/h (2 mph) or less.

        • The luggage door opening cancel switch assembly is on (the switch is pressed in).

        • The shift lever is in P, the brake pedal is depressed or the parking brake is on.

      2. Operation conditions when the power switch is off or on (ACC).


        • The power trunk lid "PBD Power Operation" customization function is set to "ON".

        • The luggage door opening cancel switch assembly is on (the switch is pressed in).

    2. Check the power trunk lid opening operation.


      1. With the luggage compartment door fully closed, press the luggage door opening switch assembly and check that the luggage compartment door opening operation begins.

      2. With the luggage compartment door fully closed, hold the electrical key transmitter sub-assembly (electrical key), press the luggage electrical key switch and check that the luggage compartment door opening operation begins (w/ Entry Function).

      3. When all the doors are unlocked, check that the luggage compartment door opens when the electrical key transmitter sub-assembly (electrical key) is not being carried and the luggage electrical key switch is pressed.

        Note

        This function operates when "Trunk Link with Door Lock" in the GTS customization settings is set to "ON". This setting is "ON" by default Click here.

      4. With the luggage compartment door fully closed, press the luggage door opening switch of the electrical key transmitter sub-assembly (electrical key) and check that the luggage compartment door opening operation begins.

    3. Check the power trunk lid closing operation.


      1. With the luggage compartment door fully opened, press the door control switch and check that the buzzer sounds once and the luggage compartment door closing operation begins.

        Tech Tips

        The closing operation cannot be performed with the luggage door opening switch assembly, the luggage electrical key switch or the luggage door opening switch of the electrical key transmitter sub-assembly (electrical key).

    4. Check the manual luggage closer operation.


      1. Open the luggage compartment door.

      2. Close the luggage compartment door to the point where it is slightly ajar and check that the closer motor of the luggage compartment door lock assembly performs a closing operation and the luggage compartment door becomes fully closed.

    5. heck the operation when another input is detected during closing and opening operations.


      1. During the power trunk lid opening operation, press the luggage door opening switch assembly, the luggage electrical key switch, the door control switch, or the luggage door opening switch of the electrical key transmitter sub-assembly (electrical key), and check that the luggage compartment door operation stops.

      2. During the power trunk lid closing operation, press the luggage door opening switch assembly, the luggage electrical key switch, the door control switch, or the luggage door opening switch of the electrical key transmitter sub-assembly (electrical key), and check that the luggage compartment door reverses operation.

  2. CHECK JAM PROTECTION FUNCTION


    1. Check the jam protection function when the luggage compartment door closing operation is being performed.


      1. Press the door control switch to activate the luggage compartment door closing operation.

      2. During the power trunk operation, use your hand to stop the closing operation (slow down the operation speed) and check that the operation reverses.

        Tech Tips

        Check the function after the door moves 30 cm (11.8 in.) or more.