FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

    A000SOJE05
    Text in Illustration
    *a

    Component without harness connected

    (Power Window Regulator Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      2 (UP) - 5 (GND) Manual UP operation Below 1 Ω
      10 (DOWN) - 5 (GND) Manual DOWN operation Below 1 Ω

      2 (UP) - 5 (GND)

      4 (AUTO) - 5 (GND)

      		 AUTO UP operation Below 1 Ω

      10 (DOWN) - 5 (GND)

      4 (AUTO) - 5 (GND)

      		 AUTO DOWN operation Below 1 Ω

      If the result is not as specified, replace the power window regulator switch assembly.

    2. A000SOJE06
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly)

      Apply auxiliary battery voltage to the power window regulator switch and check that the LED illuminates.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 8 (LED)

      Battery negative (-) → 5 (GND)

      		 LED illuminates

      If the result is not as specified, replace the power window regulator switch assembly.