RELAY(for Windshield Deicer) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FRONT WIPER DEICER RELAY


    1. A000NUXE26

      Remove the front wiper deicer relay.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the front wiper deicer relay.