REAR SUNSHADE SWITCH(for Rear Side) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE COOLER CONTROL SWITCH PANEL


    1. B002BAB

      Remove the 3 screws.

    2. B002BD4

      Using a screwdriver, detach the 12 claws and remove the cooler control switch panel.

  2. REMOVE COOLER CONTROL SWITCH KNOB

    SST
    09890-47010   ( 09891-04010, 09891-04020, 09891-04030, 09891-04040 )

    1. B002C4L

      Remove the cooler control switch knob from the cooler control case.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    2. B002BYT

      Remove the 3 screws and circuit board sub-assembly.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    3. B002BKF

      Remove the rubber switch from the cooler control switch knob (rear sunshade switch).