REAR SUNSHADE ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (w/ Rear Seat Side Airbag)

    Click here

  2. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH (w/ Rear Seat Side Airbag)

    Click here

  3. PRECAUTION (w/ Rear Seat Side Airbag)

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE REAR SEAT ASSEMBLY

    Click here

  6. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  7. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  8. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  9. REMOVE REAR SEAT SIDE GARNISH RH

    Click here

  10. REMOVE INNER ROOF SIDE GARNISH LH

    Click here

  11. REMOVE INNER ROOF SIDE GARNISH RH

    Click here

  12. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  13. REMOVE CENTER STOP LIGHT COVER

    Click here

  14. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY

    A000PB7

    1. Detach the 3 clips and 5 guides and remove the No. 2 package tray trim panel assembly.

  15. REMOVE REAR WINDOW SHADE ASSEMBLY

    A000PR5

    1. Remove the 4 bolts.

    2. Disconnect the connector and remove the rear window shade assembly.