FRONT CONSOLE BOX REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A000PO0E03
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A000RTIE02
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end LH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A000OB6E02
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end RH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end RH.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Detach the claw and slide the shifting hole cover downwards.

    2. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

      A000R71E02
      Text in Illustration
      *1 Shifting Hole Cover - -

  5. REMOVE UPPER CONSOLE PANEL

    A000STJE02
    Text in Illustration
    *1 Upper Console Panel
    *2 Upper Rear Console Panel Sub-assembly
    *3 Remote Touch Assembly

    1. Remove the 2 screws.

    2. Detach the 9 clips.

    3. Disconnect the connectors, detach the clamps, and remove the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.

  6. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY

    A000N1N

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel cup holder assembly.

  7. REMOVE REAR CONSOLE END PANEL

    A000R43

    1. Detach the 4 clips, 2 claws and 2 guides.

    2. Disconnect the connector and remove the rear console end panel.

  8. REMOVE CONSOLE BOX ASSEMBLY


    1. Disconnect the connectors and detach the clamp.

    2. Remove the 2 screws, 5 bolts and console box assembly.

      A000S4PE04
      Text in Illustration
      *1 Screw *2 Bolt