REAR SUNSHADE SWITCH(for Rear Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL REAR CONTROL SWITCH


    1. Connect the rear console box wire connector.

      Note

      Do not damage the rear seat center armrest panel sub-assembly.

    2. Attach the 4 claws to install the rear control switch.

      Note

      Do not damage the rear seat center armrest panel sub-assembly.

  2. INSTALL REAR SEAT CENTER ARMREST PANEL SUB-ASSEMBLY


    1. Partially install the rear seat center armrest panel sub-assembly.

      Note

      Do not damage the rear seat center armrest panel sub-assembly.


      1. A000S1Y

        Lift up the center of the rear seat center armrest panel sub-assembly to detach the 3 guides and partially attach the rear seat center armrest panel sub-assembly.

        Note

        Do not damage the rear seat center armrest panel sub-assembly.

      2. Attach the 6 claws.

      3. Install the screw.

  3. INSPECT REAR SEAT HEATER SYSTEM (w/ Rear Seat Heater System)

    Click here

  4. INSPECT REAR SUNSHADE SYSTEM

    Click here