AIR CONDITIONING PANEL REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE NO. 1 ION GENERATOR SUB-ASSEMBLY (w/ Ion Generator)

    Click here

  5. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. A000O2I

      Remove the 2 bolts.

    2. A000MY4

      Detach the 2 claws and 2 clips.

    3. Pull out the multi-media module receiver assembly.

    4. Disconnect the connectors and remove the multi-media module receiver assembly.

  6. REMOVE NO. 1 RADIO BRACKET

    A000SOG

    1. Remove the 3 screws and No. 1 radio bracket.

  7. REMOVE NO. 2 RADIO BRACKET

    A000T7P

    1. Remove the 3 screws and No. 2 radio bracket.