HEATER WATER PUMP(for 2AR-FSE) REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER

    Click here

  2. DRAIN ENGINE COOLANT

    Click here

  3. REMOVE HEATER WATER PUMP ASSEMBLY


    1. A000QIL

      Detach the harness clamp and disconnect the connector.

    2. Remove the 2 bolts and disconnect the heater water pump assembly.

    3. Using pliers, grip the claws of the clip and slide the 2 clips and disconnect the heater water inlet hose A and heater water inlet hose B and remove the heater water pump assembly.

      Note

      Do not apply excessive force to the heater water inlet hose.

  4. REMOVE HEATER BRACKET


    1. A000R50

      Remove the 2 bolts and heater bracket.