HEATER WATER PUMP(for 2AR-FSE) INSPECTION

PROCEDURE


  1. INSPECT HEATER WATER PUMP ASSEMBLY


    1. A000P0OE01
      Text in Illustration
      *a

      Component without harness connected

      (Heater Water Pump Assembly)

      Connect the 12 V battery positive (+) lead to terminal 2 of the heater water pump assembly connector and the 12 V battery negative (-) lead to terminal 1. Then check that the heater water pump assembly operates smoothly.

      OK
      Heater water pump assembly operates smoothly.

      Note

      Complete the check within 10 seconds if there is no water in the heater water pump assembly.