CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
INSTALL COOLER THERMISTOR (FRONT EVAPORATOR TEMPERATURE SENSOR) (for 2GR-FXE)
Note
If reusing the evaporator, do not insert the sensor at a location where the sensor was previously inserted. Insert the sensor within range A shown in the illustration.
Insert the cooler thermistor (front evaporator temperature sensor) as shown in the illustration to install it.
| Area | Specified Condition |
|---|---|
| a | 34.3 mm (1.35 in.) |
| b | 50 mm (1.97 in.) |
| c | 123.5 mm (4.86 in.) |
| d | 175 mm (6.89 in.) |
INSTALL COOLER THERMISTOR (FRONT EVAPORATOR TEMPERATURE SENSOR) (for 2AR-FSE)
Note
If reusing the evaporator, do not insert the sensor at a location where the sensor was previously inserted. Insert the sensor within range A shown in the illustration.
Insert the cooler thermistor (front evaporator temperature sensor) as shown in the illustration to install it.
| Area | Specified Condition |
|---|---|
| a | 50 mm (1.97 in.) |
| b | 101.3 mm (3.99 in.) |
INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for LH Side)
INSTALL NO. 4 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
INSTALL NO. 6 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
INSTALL NO. 7 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
INSTALL NO. 5 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for 3 Zone)
INSTALL NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for RH Side)
INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
INSTALL COOLER EXPANSION VALVE
INSTALL AIR CONDITIONING TUBE ASSEMBLY
INSTALL AIR CONDITIONING HARNESS ASSEMBLY
INSTALL BLOWER ASSEMBLY
INSTALL AIR CONDITIONING UNIT