ROOM TEMPERATURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  2. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (w/ Ion Generator)

    Click here

  4. REMOVE AIR DUCT SUB-ASSEMBLY (w/ Ion Generator)

    Click here

  5. REMOVE COOLER THERMISTOR

    A000ONE

    1. Disconnect the connector and hose.

    2. Detach the 2 claws and remove the cooler thermistor (room temperature sensor).