PTC HEATER ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY (for LHD)

    Click here

  3. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY (for RHD)

    B002BD2

    1. Remove the clip and No. 1 air duct sub-assembly.

  4. REMOVE QUICK HEATER ASSEMBLY

    A000QUY

    1. Remove the 2 claws and quick heater assembly.

      Note

      If the claws of the quick heater assembly are damaged, install the quick heater assembly with 2 screws (90159-50327).