PTC HEATER ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY (for LHD)

    Click here

  3. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY (for RHD)

    B002BD2

    1. Remove the clip and No. 1 air duct sub-assembly.

  4. REMOVE QUICK HEATER ASSEMBLY


    1. B002BJE

      Remove the screw.

    2. Detach the 2 claws and quick heater assembly.

      Note


      • B002B7CC01
        *a Element
        *b Fin

        Do not hold the quick heater assembly by the element or fin. Also, do not damage the quick heater assembly.

      • Foul odors may occur due to oil adhering to the quick heater assembly.