AIR CONDITIONING AMPLIFIER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note


    • After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

    • Before disconnecting the cable form the negative (-) auxiliary battery terminal or replacing the air conditioning amplifier assembly, record the last operation state of the air conditioning for each transmitter. After replacement, it is necessary to perform memory registration for each transmitter Click here.

  2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  6. REMOVE FRONT DOOR OPENING TRIM COVER RH

    Click here

  7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  10. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

  11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

    A000O5D

    1. Disconnect the connectors.

    2. Detach the clamp.

    3. Remove the screw and air conditioning amplifier assembly.