REAR AIR CONDITIONING PANEL REASSEMBLY

PROCEDURE


  1. INSTALL COOLER CONTROL SWITCH KNOB


    1. Install the rubber switch to the cooler control switch knob (rear air conditioning panel).

    2. B002BYT

      Install the circuit board sub-assembly with the 3 screws.

      Note


      • When replacing the cooler control switch knob (rear air conditioning panel), before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    3. B002BJ0

      Install the cooler control switch knob (rear air conditioning panel) to the cooler control case.

      Note


      • When replacing the cooler control switch knob (rear air conditioning panel), before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

  2. INSTALL COOLER CONTROL SWITCH PANEL


    1. Attach the 12 claws to install the cooler control switch panel.

    2. Install the 3 screws.