CHILD RESTRAINT SEAT TETHER ANCHOR REMOVAL

PROCEDURE

1. PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing Click here.

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

   Click here

3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

5. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

   Click here

6. REMOVE REAR SEAT HEADREST ASSEMBLY

   Click here

7. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

   Click here

8. REMOVE BENCH TYPE REAR SEATBACK ASSEMBLY

   Click here

9. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

10. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

11. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

12. REMOVE REAR SEAT SIDE GARNISH RH

    Click here

13. REMOVE INNER ROOF SIDE GARNISH LH

    Click here

14. REMOVE INNER ROOF SIDE GARNISH RH

    Click here

15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

16. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

    
    

    1. 

       Remove the bolt and child restraint seat tether anchor bracket.

       Tech Tips

       Use the same procedure for the other 2 child restraint seat tether anchor brackets.