FRONT BLOWER MOTOR REMOVAL

PROCEDURE

1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

   Click here

2. REMOVE FRONT DOOR SCUFF PLATE RH

   Click here

3. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

4. REMOVE FRONT DOOR OPENING TRIM COVER RH

   Click here

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

   Click here

6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

7. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Remove the 3 screws and blower with fan motor sub-assembly.

   3. When reusing the blower motor with fan sub-assembly:

      
      

      1. Remove the heater packing from the blower motor with fan sub-assembly.