REAR CONTROL SWITCH DISASSEMBLY

PROCEDURE


  1. REMOVE COOLER CONTROL SWITCH PANEL


    1. B002BAB

      Remove the 3 screws.

    2. B002BD4

      Using a screwdriver, detach the 12 claws and remove the cooler control switch panel.

  2. REMOVE COOLER CONTROL SWITCH KNOB


    1. B002C4L

      Remove the cooler control switch knob from the cooler control case.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    2. B002BYT

      Remove the 3 screws and circuit board sub-assembly.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    3. B002BKF

      Remove the rubber switch from the cooler control switch knob.