AHS ECU INSTALLATION

CAUTION / NOTICE / HINT

Note


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Handle components indoors as much as possible to prevent foreign matter from entering and adhering to headlight assembly components.

  • Do not reuse parts which have reduced fastening ability due to thread damage.

  • When installing components, make sure that the wire harness is not pinched or pulled.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket.

  2. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH


    1. Connect the 2 connectors.

    2. Return the connector cover to its original position.

    3. Install the headlight light control ECU sub-assembly LH with the 3 screws.

  3. INSTALL HEADLIGHT ASSEMBLY LH

    Click here