2AR-FSE ENGINE CONTROL SERVICE DATA

CAMSHAFT OIL CONTROL VALVE
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 6.9 to 7.9 Ω
THROTTLE BODY
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
MASS AIR FLOW METER
Tester Connection Condition Specified Condition
1 (THA) - 2 (E2) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ
CRANKSHAFT POSITION SENSOR
Tester Connection Condition Specified Condition
1 - 2 Cold 1630 to 2740 Ω
Hot 2065 to 3225 Ω
ENGINE COOLANT TEMPERATURE SENSOR
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
KNOCK SENSOR
Tester Connection Condition Specified Condition
1 - 2 25°C (77°F) 120 to 280 kΩ
AIR FUEL RATIO SENSOR
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher
HEATED OXYGEN SENSOR
Tester Connection Condition Specified Condition
1 (HT1B) - 2 (+B) 20°C (68°F) 9 to 14 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher
RELAY
Item Tester Connection Condition Specified Condition
NO. 1 INTEGRATION RELAY (EFI MAIN1) 1D-1 - 1E-16 Battery voltage not applied to terminals 1E-6 and 1E-10 10 kΩ or higher
Battery voltage applied to terminals 1E-6 and 1E-10 Below 1 Ω
NO. 1 INTEGRATION RELAY (EFI MAIN2) 1D-1 - 1F-12 Battery voltage not applied to terminals 1F-10 and 1E-10 10 kΩ or higher
Battery voltage applied to terminals 1F-10 and 1E-10 Below 1 Ω
NO. 1 INTEGRATION RELAY (INJ) 1D-1 - 1F-11 Battery voltage not applied to terminals 1F-10 and 1E-19 10 kΩ or higher
Battery voltage applied to terminals 1F-10 and 1E-19 Below 1 Ω
NO. 1 INTEGRATION RELAY (IG2) 1D-1 - 1F-2 Battery voltage not applied to terminals 1E-2 and 1E-10 10 kΩ or higher
Battery voltage applied to terminals 1E-2 and 1E-10 Below 1 Ω
NO. 1 INTEGRATION RELAY (A/F) 1D-1 - 1F-4 Battery voltage not applied to terminals 1E-16 and 1E-10 10 kΩ or higher
Battery voltage applied to terminals 1E-16 and 1E-10 Below 1 Ω