FRONT CONSOLE BOX(for 5-Passenger with Ottoman) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 3 BOX PANEL

    Click here

  5. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  10. REMOVE LOWER CONSOLE COVER


    1. Remove the lower console cover.

  11. REMOVE UPPER REAR CONSOLE PANEL GARNISH

    A000XZ7E02
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape as shown in the illustration.

    2. using moulding remover B, detach the 5 clips and 3 guides, and then remove the upper rear console panel garnish.

  12. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    A000VC3

    1. Remove the 2 screws and move the upper No. 1 console panel garnish in the direction of the arrow to remove it.

  13. REMOVE REAR CONSOLE BOX GARNISH

    A000ZZ2E02
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape as shown in the illustration.

    2. using moulding remover A, detach the 2 clips and remove the rear console box garnish.

  14. REMOVE REAR NO. 1 CONSOLE END PANEL GARNISH

    A000U0G

    1. Remove the 2 screws.

    2. Detach the 2 clips and 4 guides, and then remove the rear No. 1 console end panel garnish.

  15. REMOVE REAR NO. 2 CONSOLE END PANEL GARNISH

    Tech Tips

    Use the same procedure described for the rear No. 1 console end panel garnish.

  16. REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY WITH TELEVISION DISPLAY


    1. Remove the 6 bolts.

    2. Move the console compartment box assembly with television display upward to detach the 2 hooks and disconnect the 3 connectors.

      A000ZJ0
    3. A000XAL

      Move the console compartment box assembly with television display backward and disconnect the 3 connectors.

    4. A000UQU

      Move the console compartment box assembly with television display backward and disconnect the connector.

  17. REMOVE NO. 2 CONSOLE BOX DUCT

    A000YZK

    1. Remove the 2 clips and No. 2 console box duct.

  18. REMOVE CONSOLE BOX ASSEMBLY

    A000W9N

    1. Disconnect the 4 connectors and detach the wire harness clamp.

    2. Remove the 2 screws and 4 bolts.

    3. Detach the 2 clips and remove the console box assembly.