REAR DOOR SUNSHADE ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR CURTAIN SUB-ASSEMBLY LH


    1. for Standard Body:


      1. Connect the connector.

      2. Attach the 3 clips to install the rear curtain sub-assembly LH.

      3. Install the 10 screws.

    2. for Long Body:


      1. Connect the connector.

      2. Attach the 4 clips to install the rear curtain sub-assembly LH.

      3. Install the 10 screws.

  2. INSTALL REAR DOOR NO. 2 FRAME GARNISH LH

    Click here

  3. INSTALL REAR DOOR FRAME GARNISH LH

    Click here

  4. INSTALL REAR DOOR TRIM COVER LH

    Click here

  5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH

    Click here

  7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  10. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  11. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here