REAR DOOR SUNSHADE ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  2. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  3. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  4. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  5. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  8. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH

    Click here

  9. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  10. REMOVE REAR DOOR TRIM COVER LH

    Click here

  11. REMOVE REAR DOOR FRAME GARNISH LH

    Click here

  12. REMOVE REAR DOOR NO. 2 FRAME GARNISH LH

    Click here

  13. REMOVE REAR CURTAIN SUB-ASSEMBLY LH


    1. A000YH0

      for Standard Body:


      1. Remove the 10 screws.

      2. Detach the 3 clips and remove the rear curtain sub-assembly LH.

      3. Disconnect the connector

    2. A00100E

      for Long Body:


      1. Remove the 10 screws.

      2. Detach the 4 clips and remove the rear curtain sub-assembly LH.

      3. Disconnect the connector