REAR SUNSHADE SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE REAR SUNSHADE SYSTEM

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Connect the intelligent tester to the DLC3.

   2. Turn the power switch ON (IG).

   3. Turn the tester on.

   4. Enter the following menus:

   5. Select: Body / Main Body / Utility / Customize /

   6. Select the setting by referring to the table below.

      Others

      Display	Default	Contents	Setting
      Rear Shade Delay Time	0.7 s	Function to adjust reverse-linked sunshade lowering function's response time	0.7 s / 1.2 s / 0.9 s / 0.0 s
      R-pos to Rear Sun Shade COM	ON	Reverse linked function	ON or OFF