CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL CONSOLE BOX ASSEMBLY
Attach the 2 clips to install the console box assembly.
Install the 2 screws and 4 bolts.
Connect each connector and attach the wire harness clamp.
INSTALL LOWER CONSOLE COVER
Install the lower console cover.
INSTALL DISC PLAYER WITH BRACKET
Connect each connector.
Move the disc player with bracket upward to attach the 2 hooks.
Install the disc player with bracket with the 4 bolts.
INSTALL REAR CONSOLE END PANEL
Connect each connector and attach the wire harness clamp.
Attach the 2 hooks and 2 clips to install the rear console end panel.
INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
Attach the 2 clips to install the rear console end panel sub-assembly.
Install the 2 screws.
INSTALL REAR NO. 1 CONSOLE END PANEL GARNISH
Attach the 3 guides and 3 clips to install the rear No. 1 console end panel garnish.
INSTALL REAR NO. 2 CONSOLE END PANEL GARNISH
Attach the 3 guides and 3 clips to install the rear No. 2 console end panel garnish.
INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
Attach the 4 clips to install the upper No. 1 console panel garnish.
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL
INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
INSTALL NO. 3 BOX PANEL
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
INSTALL INSTRUMENT PANEL FINISH PANEL END RH