SIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

   Tech Tips

   When installing the moulding, heat the vehicle body and moulding using a heat light.

   Standard
   Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Rear Door Outside Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body and moulding excessively.

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new rear door outside moulding sub-assembly LH.

      
      

      1. Using a heat light, heat the vehicle body and rear door outside moulding sub-assembly LH.

      2. Remove the peeling paper from the face of the rear door outside moulding sub-assembly LH.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. 

         Text in Illustration

         *A	for Standard Body
         *B	for Long Body
         *1	Double-sided Tape

         Attach the 4 clips to install the rear door outside moulding sub-assembly LH.

         Tech Tips

         Press the rear door outside moulding sub-assembly LH firmly to install it.

   3. Install the nut and rear door hole plug.

2. INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

   Tech Tips

   When installing the moulding, heat the vehicle body and moulding using a heat light.

   Standard
   Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Front Door Outside Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body and moulding excessively.

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new front door outside moulding.

      
      

      1. Using a heat light, heat the vehicle body and front door outside moulding sub-assembly LH.

      2. Remove the peeling paper from the face of the front door outside moulding sub-assembly LH.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

   3. 

      Text in Illustration

      *1	Double-sided Tape

      Attach the 4 clips to install the front door outside moulding sub-assembly LH.

      Tech Tips

      Press the front door outside moulding sub-assembly LH firmly to install it.

   4. Install the nut and front door hole plug.

3. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH

   Tech Tips

   When installing the moulding, heat the vehicle body and moulding using a heat light.

   Standard
   Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Front Fender Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body and moulding excessively.

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new front fender moulding sub-assembly LH.

      
      

      1. Using a heat light, heat the vehicle body and front fender moulding sub-assembly LH.

      2. Remove the peeling paper from the face of the front fender moulding sub-assembly LH.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

   3. 

      Text in Illustration

      *1	Double-sided Tape

      Attach the clip and guide to install the front fender moulding sub-assembly LH.

      Tech Tips

      Press the front fender moulding sub-assembly LH firmly to install it.