ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL ROCKER PANEL MOULDING LH


    1. for Standard Body:

      Attach the 10 clips to install the rocker panel moulding LH.

    2. for Long Body:

      Attach the 11 clips to install the rocker panel moulding LH.

    3. Install the 2 screws.

    4. for Standard Body:

      Install the 7 clips.

    5. for Long Body:

      Install the 8 clips.

    6. Install the screw on the rear side.

    7. Install the screw on the front side.

  2. INSTALL FRONT DOOR NO. 3 WEATHERSTRIP LH


    1. for Standard Body:

      Attach the 12 clips to install the front door No. 3 weatherstrip LH.

    2. for Long Body:

      Attach the 13 clips to install the front door No. 3 weatherstrip LH.

  3. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR


    1. Install the No. 6 rocker panel moulding protector with the clip and 2 screws.

  4. INSTALL QUARTER PANEL WHEEL OPENING MOULDING LH

    Click here

  5. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH

    Click here

  6. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH

    Click here