REAR BUMPER REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR BUMPER PROTECTOR

    Tech Tips


    • Use the same procedure for both rear bumper protectors.

    • When installing the rear bumper protector, heat the rear bumper cover using a heat light.

      Standard
      Item Temperature
      Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A000YLC

      Install a new rear bumper protector.


      1. Using a heat light, heat the rear bumper cover.

      2. Remove the peeling paper from the face of the rear bumper protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the rear bumper protector.

        Tech Tips

        Press the rear bumper protector firmly to install it.

  2. INSTALL REFLEX REFLECTOR ASSEMBLY LH

    Click here

  3. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL REAR BUMPER PLATE LH


    1. Attach the 2 claws to install the rear bumper plate LH.

  5. INSTALL REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL REAR BUMPER MOULDING (for Sport Package)


    1. Attach the 2 claws to install the rear bumper moulding.

    2. Install the 3 bolts.

  7. INSTALL LOWER REAR BUMPER COVER


    1. Install the lower rear bumper cover with the 8 retainers.

  8. INSTALL REAR BUMPER EXTENSION LH


    1. Install the rear bumper extension LH with the clip.

    2. Install the 3 bolts.

  9. INSTALL REAR BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL REAR BUMPER SIDE RETAINER LH


    1. Install the rear bumper side retainer LH with the 2 screws.

  11. INSTALL REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    Click here

  13. INSTALL NO. 1 ULTRASONIC SENSOR

    Click here

  14. INSTALL ULTRASONIC SENSOR RETAINER

    Tech Tips

    When installing the ultrasonic sensor retainer, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. Install a new ultrasonic sensor retainer.


      1. Using a heat light, heat the rear bumper cover.

      2. Remove the peeling paper from the face of the rear bumper protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    4. Install the 2 ultrasonic sensor retainers.

      Tech Tips

      Press the ultrasonic sensor retainer firmly to install it.

  15. INSTALL NO. 3 LUGGAGE ROOM WIRE


    1. Attach the 2 claws to install the ultrasonic sensor clip.

      Tech Tips

      Use the same procedure to install the ultrasonic sensor clip on the other side.

    2. Attach the 4 clamps to install the No. 3 luggage room wire.

    3. Connect the 4 connectors.