FUEL LID OPENER MOTOR ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL LID MOTOR LOCK ASSEMBLY


    1. A000YW8E05
      Text in Illustration
      *a

      Component without harness connected:

      (Fuel Lid Motor Lock Assembly)
      *b Shaft Stroke
      *c Open

      Check the shaft stroke.


      1. Apply battery voltage to the lock control and check that the lock operates in the open direction.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Shaft moves in open direction

        If the result is not as specified, replace the fuel lid motor lock assembly.

      2. Check the shaft stroke.

        Standard
        10.6 mm (0.417 in.) or more