LUGGAGE COMPARTMENT DOOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  5. REMOVE BATTERY SERVICE HOLE COVER LH

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A000WSYE03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A000ZUG

      Remove the 2 screws and luggage compartment door assist grip.

  8. REMOVE SWITCH BEZEL


    1. A000TW3

      Using a screwdriver, detach the 2 claws and remove the switch bezel.

      Tech Tips

      Tape the screwdriver tip before use.

  9. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY


    1. A000XIGE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the No. 2 courtesy light assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  10. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH


    1. A000TV5

      Detach the 2 claws and remove the rear combination light service cover LH.

  11. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A000XNP

      Using a clip remover, remove the 3 clips and luggage compartment door hinge cover LH.

  13. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. REMOVE BACK DOOR TRIM COVER


    1. A000UOG

      Using a clip remover, remove the 4 clips.

    2. Detach the 10 clips and back door trim cover.

  15. REMOVE LUGGAGE COMPARTMENT LOCK CYLINDER


    1. A000TQA

      Disconnect the connector and remove the connector clamp.

    2. Remove the 2 nuts and luggage compartment lock cylinder.

    3. Disconnect the cable.

  16. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY

    Click here

  17. REMOVE LUGGAGE COMPARTMENT DOOR CLOSER SWITCH

    Click here

  18. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

  19. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  20. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

  21. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  22. REMOVE LUGGAGE ELECTRICAL KEY SWITCH

    Click here

  23. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

  24. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here