REAR DOOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH

    A000UOYE03

    1. for Standard Body:

      Check that the clearance measurements of areas A to N are within the standard range.

      Standard
      Area Specified Condition Area Specified Condition
      A 4.35 to 7.35 mm (0.171 to 0.289 in.) B -1.05 to 1.95 mm (0.0413 to 0.0767 in.)
      C 4.35 to 7.35 mm (0.171 to 0.289 in.) D -1.55 to 1.45 mm (0.0610 to 0.0571 in.)
      E 4.35 to 7.35 mm (0.171 to 0.289 in.) F 0.15 to 3.15 mm (-0.0217 to 0.140 in.)
      G 4.35 to 7.35 mm (0.171 to 0.289 in.) H 0.55 to 3.55 mm (-0.0394 to 0.0394 in.)
      I 4.35 to 7.35 mm (0.171 to 0.289 in.) J -1.0 to 1.0 mm (-0.0394 to 0.0394 in.)
      K 2.8 to 5.2 mm (0.110 to 0.205 in.) L -1.0 to 1.0 mm (-0.0394 to 0.0394 in.)
      M 2.7 to 5.7 mm (0.106 to 0.224 in.) N -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)

    2. for Long Body:

      Check that the clearance measurements of areas A to N are within the standard range.

      Standard
      Area Specified Condition Area Specified Condition
      A 4.35 to 7.35 mm (0.171 to 0.289 in.) B -0.85 to 2.15 mm (0.0335 to 0.0846 in.)
      C 4.35 to 7.35 mm (0.171 to 0.289 in.) D -1.05 to 1.95 mm (0.0413 to 0.767 in.)
      E 4.35 to 7.35 mm (0.171 to 0.289 in.) F 0.35 to 2.65 mm (-0.0138 to 0.104 in.)
      G 4.35 to 7.35 mm (0.171 to 0.289 in.) H 0.25 to 3.25 mm (-0.00984 to 0.128 in.)
      I 4.35 to 7.35 mm (0.171 to 0.289 in.) J -1.0 to 1.0 mm (-0.0394 to 0.0394 in.)
      K 2.8 to 5.2 mm (0.110 to 0.205 in.) L -1.0 to 1.0 mm (-0.0394 to 0.0394 in.)
      M 2.7 to 5.7 mm (0.106 to 0.224 in.) N -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)