LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY

   
   

   1. 

      Attach the 2 claws and install the luggage door opening cancel switch assembly.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER

   Click here

4. INSTALL INSTRUMENT PANEL LOWER

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

9. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

10. INSTALL DECK TRIM SIDE BOARD LH

    Click here

11. INSTALL DECK BOARD ASSEMBLY

    Click here

12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

13. CHECK SRS WARNING LIGHT

    Click here