POWER TRUNK LID SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List.

    5. According to the display on GTS, read the Data List.

      Main Body:
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Trunk Lock Position Luggage compartment door lock signal / Lock or Unlock

      Lock: Luggage compartment door lock assembly locked

      Unlock: Luggage compartment door lock assembly unlocked

      		 -
      Trunk/BDoor Open SW Luggage door opening switch signal / ON or OFF

      ON: Luggage door opening switch is ON

      OFF: Luggage door opening switch is OFF

      		 -
      Trunk Main SW Luggage door opening cancel switch signal / ON or OFF

      ON: Luggage door opening cancel switch is ON

      OFF: Luggage door opening cancel switch is OFF

      		 -
      Trunk Link with Door Lock Luggage compartment door lock function / ON or OFF Customized value displayed -
      Body No. 4:
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Luggage Door Lock/Unlock Switch Luggage compartment door key cylinder switch signal / ON or OFF

      ON: Luggage compartment door key cylinder switch is turned to open position

      OFF: Luggage compartment door key cylinder switch is not turned

      		 -

      Tech Tips

      Even though Luggage Push Switch and luggage compartment door closer assembly switch items are displayed in the Body No. 4 Data List, use the Back Door Data List to determine whether a part is faulty or not.

      Back Door:
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Back Door Handle SW Luggage electrical key switch signal / ON or OFF

      ON: Luggage electrical key switch is ON

      OFF: Luggage electrical key switch is OFF

      		 -
      Half Latch SW Half-latch switch signal / ON or OFF

      ON: Half-latch switch is ON

      OFF: Half-latch switch is OFF

      		 -
      Close Motor Pos1 Closer motor position switch signal / ON or OFF

      ON: Closer motor position switch is ON

      OFF: Closer motor position switch is OFF

      		 -
      Striker Switch Striker switch signal / ON or OFF

      ON: Striker switch is ON

      OFF: Striker switch is OFF

      		 -
      Pawl Position SW Pawl switch signal / ON or OFF

      ON: Pawl switch is ON

      OFF: Pawl switch is OFF

      		 -
      Courtesy SW Courtesy switch signal / ON or OFF

      ON: Courtesy switch is ON

      OFF: Courtesy switch is OFF

      		 -
      PBD Close SW Luggage compartment door closer switch signal / ON or OFF

      ON: Luggage compartment door closer switch is ON

      OFF: Luggage compartment door closer switch is OFF

      		 -
      PBD Position (Close-1/4) Luggage compartment door position (Fully closed - 1/4 open) / CAUTION or OK

      CAUTION: Luggage compartment door position is not fully closed - 1/4 opened

      OK: Luggage compartment door position is fully closed - 1/4 opened

      		 -
      PBD Position (1/4-2/4) Luggage compartment door position (Fully closed - 2/4 open) / CAUTION or OK

      CAUTION: Luggage compartment door position is not 1/4 opened - 2/4 opened

      OK: Luggage compartment door position is 1/4 opened - 2/4 opened

      		 -
      PBD Position (2/4-3/4) Luggage compartment door position (Fully closed - 3/4 open) / CAUTION or OK

      CAUTION: Luggage compartment door position is not 2/4 opened - 3/4 opened

      OK: Luggage compartment door position is 2/4 opened - 3/4 opened

      		 -
      PBD Position (3/4-Open) Luggage compartment door position (3/4 open - Fully open) / CAUTION or OK

      CAUTION: Luggage compartment door position is not 3/4 opened - fully opened

      OK: Luggage compartment door position is 3/4 opened - fully opened

      		 -
      PBD Power Operation Turns power trunk lid function / Valid or Invalid

      Valid: Power trunk lid is valid

      Invalid: Power trunk lid is invalid

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. According to the display on GTS, perform the Active Test.

      Back Door:
      Tester Display Test Part Control Range Diagnostic Note
      Latch Release Operate luggage compartment door latch release ON or OFF -
      PBD Motor Operate luggage closer motor

      FORWARD or OFF

      REVERSE or OFF

      		 -
      PBD Clutch Operate luggage closer motor clutch ON or OFF -
      PBD Buzzer Operate warning buzzer ON or OFF -
      PBD Close SW Light Operate luggage compartment door closer switch light ON or OFF -

      Tech Tips

      Even though Trunk Lid Open is displayed in the Body No. 4 Active Test, use the PBD/PTL Active Test to check the operation.