LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE ELECTRICAL KEY SWITCH

   
   

   1. Install the television camera assembly to the luggage electrical key switch with the 2 screws.

   2. Connect the connector.

   3. Connect the sub-wire harness connector.

2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

   Click here

3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

   Click here

4. INSTALL REAR LIGHT ASSEMBLY LH

   Click here

5. INSTALL REAR LIGHT ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

6. INSTALL BACK DOOR TRIM COVER

   Click here

7. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

   Click here

8. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

   Click here

9. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

   Click here

10. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH

    Click here

11. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY

    Click here

12. INSTALL SWITCH BEZEL

    Click here

13. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

15. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

16. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

17. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

18. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

19. ADJUST REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)

    Click here