LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

5. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

   Click here

8. REMOVE SWITCH BEZEL

   Click here

9. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY

   Click here

10. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH

    Click here

11. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

12. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

13. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

14. REMOVE BACK DOOR TRIM COVER

    Click here

15. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

16. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

17. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

18. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

19. REMOVE LUGGAGE ELECTRICAL KEY SWITCH

    
    

    1. 

       Disconnect the sub-wire harness connector.

    2. 

       Disconnect the connector.

    3. 

       Remove the 2 screws and television camera assembly from the luggage electrical key switch.