REAR SEAT CUSHION HEATER(for Fixed Seat Type) INSPECTION

PROCEDURE


  1. INSPECT BENCH TYPE REAR SEAT CUSHION COVER


    1. for LH Side:


      1. A000TKOE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seat Cushion Cover (Seat cushion Part))

        Check the resistance of the bench type rear seat cushion cover (seat cushion part).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        1.8 to 2.1 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        1.8 to 2.1 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        1.8 to 2.1 Ω

        If the result is not as specified, replace the bench type rear seat cushion cover.

      2. A000WXOE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seat Cushion Cover (LH Side))

        Check the resistance of the bench type rear seat cushion cover (LH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        14.3 to 17.5 Ω

        If the result is not as specified, replace the bench type rear seat cushion cover.

      3. A000WXOE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seat Cushion Cover (RH Side))

        Check the resistance of the bench type rear seat cushion cover (RH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        14.1 to 17.3 Ω

        If the result is not as specified, replace the bench type rear seat cushion cover.

    2. for RH Side:


      1. A000TKOE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seat Cushion Cover (Seat cushion Part))

        Check the resistance of the bench type rear seat cushion cover (seat cushion part).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        1.8 to 2.1 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        1.8 to 2.1 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        1.8 to 2.1 Ω

        If the result is not as specified, replace the bench type rear seat cushion cover.

      2. A000WXOE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seat Cushion Cover (LH Side))

        Check the resistance of the bench type rear seat cushion cover (LH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        14.3 to 17.5 Ω

        If the result is not as specified, replace the bench type rear seat cushion cover.

      3. A000WXOE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seat Cushion Cover (RH Side))

        Check the resistance of the bench type rear seat cushion cover (RH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        14.1 to 17.3 Ω

        If the result is not as specified, replace the bench type rear seat cushion cover.