CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Set the separate type front seat cushion cover in place.
for Driver Side:
| *1 | Hog Ring Pliers |
except Sport Package:
Using hog ring pliers, install the separate type front seat cushion cover to the front seat cushion pad with 21 new hog rings.
Note
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
| *1 | Hog Ring Pliers |
for Sport Package:
Using hog ring pliers, install the separate type front seat cushion cover to the front seat cushion pad with 17 new hog rings.
Note
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the 2 clips.
for Front Passenger Side:
for Ottoman:
| *1 | Hog Ring Pliers |
Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 21 new hog rings.
Note
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the 2 clips.
for Front Passenger Side:
except Ottoman:
| *1 | Hog Ring Pliers |
except Sport Package:
Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 21 new hog rings.
Note
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
| *1 | Hog Ring Pliers |
for Sport Package:
Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 17 new hog rings.
Note
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the 2 clips.
INSTALL SEAT CUSHION COVER WITH PAD
INSTALL FRONT SEAT CUSHION ASSEMBLY LH
INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH
INSTALL FRONT SEAT INNER CUSHION SHIELD LH
INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)
INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)
INSTALL FRONT SEAT CUSHION SHIELD LH
INSTALL FRONT SEAT ASSEMBLY LH
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)