FRONT SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A000TKOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Cover (Cushion Part))

      Check the resistance of the separate type front seat cushion cover (cushion part).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.8 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.8 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.8 Ω

        If the result is not as specified, replace the separate type front seat cushion cover.

    2. A000WXOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Cover (Wing Part))

      Check the resistance of the separate type front seat cushion cover (wing part).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 7.2 to 8.8 Ω

        If the result is not as specified, replace the separate type front seat cushion cover.