REAR SEATBACK HEATER(for Ottoman) INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE REAR SEATBACK COVER LH


    1. A000TKOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Rear Seatback Cover (Seatback Part))

      Check the resistance of the separate type rear seatback cover (seatback part).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω

        If the result is not as specified, replace the separate type rear seatback cover.

    2. A000WXOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Rear Seatback Cover (LH Side))

      Check the resistance of the separate type rear seatback cover (LH Side).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.4 to 17.7 Ω

        If the result is not as specified, replace the separate type rear seatback cover.

    3. A000WXOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Rear Seatback Cover (RH Side))

      Check the resistance of the separate type rear seatback cover (RH side).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.4 to 17.7 Ω

        If the result is not as specified, replace the separate type rear seatback cover.

  2. INSPECT SEPARATE TYPE REAR SEATBACK COVER RH


    1. A000TKOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Rear Seatback Cover (Seatback Part))

      Check the resistance of the separate type rear seatback cover (seatback part).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.8 to 2.1 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.8 to 2.1 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        		 1.8 to 2.1 Ω

        If the result is not as specified, replace the separate type rear seatback cover.

    2. A000WXOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Rear Seatback Cover (LH Side))

      Check the resistance of the separate type rear seatback cover (LH side).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.2 to 17.4 Ω

        If the result is not as specified, replace the separate type rear seatback cover.

    3. A000WXOE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Rear Seatback Cover (RH Side))

      Check the resistance of the separate type rear seatback cover (RH side).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.2 to 17.4 Ω

        If the result is not as specified, replace the separate type rear seatback cover.