CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL AIR HOSE
for LHD:
Attach the 2 claws to install the air hose.
Install the 2 hose clamps and bolt.
for RHD:
Attach the 2 claws to install the air hose.
Install the hose clamp and bolt.
Attach the 2 claws to install the hose clamp.
Attach the 2 claws to connect the air hose connector.
INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
INSTALL ROOF SIDE NO. 2 AIR DUCT LH
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
INSTALL INNER ROOF SIDE GARNISH RH
INSTALL INNER ROOF SIDE GARNISH LH
INSTALL REAR SEAT SIDE GARNISH RH
INSTALL REAR SEAT SIDE GARNISH LH
INSTALL REAR DOOR SCUFF PLATE RH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR SEAT ASSEMBLY
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)
CHECK SRS WARNING LIGHT
CHECK REAR SEAT ASSEMBLY
Check the power seat operation:
Check the climate control seat system:
Check the seat vibration system: