SEAT VIBRATOR MODULE ASSEMBLY(for Ottoman) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL SEAT VIBRATOR MODULE ASSEMBLY

    A000XB6

    1. Install the module with the 3 bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    2. Connect the connector.

    3. Attach the wire harness clamp.

    4. Attach the 2 claws to connect the air hose connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

  3. INSTALL REAR FLOOR FINISH PLATE

    Click here

  4. INSTALL TOOL BOX (w/o Spare Tire)

    Click here

  5. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

  6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  7. INSTALL NO. 1 COOLER COVER

    Click here

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  9. INSTALL DECK TRIM SIDE BOARD RH

    Click here

  10. INSTALL ROPE HOOK ASSEMBLY

    Click here

  11. INSTALL ROPE HOOK

    Click here

  12. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  13. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  14. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  15. CHECK REAR SEAT ASSEMBLY


    1. Check the seat vibration system Click here.