LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. A000TMOE03
      Text in Illustration
      *1 Pelvic Support Motor
      *a

      Component without harness connected

      (Lumbar Support Adjuster Assembly LH (Pelvic Support Motor))

      Check the operation of the lumbar support adjuster assembly LH (pelvic support motor).


      1. Apply battery voltage to the lumbar support adjuster assembly LH (pelvic support motor) connector, and check that the lumbar support adjuster assembly LH (pelvic support motor) operates smoothly as follows.

        OK
        Condition Specified Condition

        Battery positive (+) → 5 (UP)

        Battery negative (-) → 6 (DOWN)

        		 Upward

        Battery positive (+) → 6 (DOWN)

        Battery negative (-) → 5 (UP)

        		 Downward

        If the result is not as specified, replace the lumbar support adjuster assembly LH (pelvic support motor).

    2. A000TMOE04
      Text in Illustration
      *1 Lumbar Support Motor
      *a

      Component without harness connected

      (Lumbar Support Adjuster Assembly LH (Lumbar Support Motor))

      Check the operation of the lumbar support adjuster assembly LH (lumbar support motor).


      1. Apply battery voltage to the lumbar support adjuster assembly LH (lumbar support motor) connector, and check that the lumbar support adjuster assembly LH (lumbar support motor) operates smoothly as follows.

        OK
        Condition Specified Condition

        Battery positive (+) → 5 (H)

        Battery negative (-) → 6 (R)

        		 Forward

        Battery positive (+) → 6 (R)

        Battery negative (-) → 5 (H)

        		 Backward

        If the result is not as specified, replace the lumbar support adjuster assembly LH (lumbar support motor).

  2. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH


    1. A000XQPE01
      Text in Illustration
      *a

      Component without harness connected

      (Lumbar Support Adjuster Assembly RH)

      Check the operation of the lumbar support adjuster assembly RH.


      1. Apply battery voltage to the lumbar support adjuster assembly RH connector, and check that the lumbar support adjuster assembly RH operates smoothly as follows.

        OK
        Condition Specified Condition

        Battery positive (+) → 5 (H1)

        Battery negative (-) → 6 (R1)

        		 Forward

        Battery positive (+) → 6 (R1)

        Battery negative (-) → 5 (H1)

        		 Backward

        If the result is not as specified, replace the lumbar support adjuster assembly RH.