LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR SEATBACK SPRING ASSEMBLY LH

   
   

   1. Set the rear seatback cover with pad LH in place.

   2. Attach the seatback cover bracket with the nut.

      Torque:

      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

   3. Connect the connector and install the wire harness clamp.

   4. Attach the 8 hooks.

   5. Using hog ring pliers, install the rear seatback spring assembly LH (lumbar support adjuster assembly LH) to the rear seatback cover with pad LH with 19 new hog rings.

      Note

      
      

      • Be careful not to damage the rear seatback cover with pad LH.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback cover with pad LH.

      

      Text in Illustration

      *1	Seatback Cover Bracket	*2	Hook
      *3	Hog Ring Pliers	-	-

2. INSTALL REAR SEAT LOCK BASE LH

   Click here

3. INSTALL REAR SEAT COVER CAP LH

   Click here

4. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY

   Click here

5. INSTALL REAR SEAT CLIMATE CONTROL ECU LH

   Click here

6. INSTALL POSITION CONTROL ECU ASSEMBLY

   Click here

7. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

   Click here

8. INSTALL REAR SEAT HEADREST SUPPORT

   Click here

9. INSTALL REAR SEAT HEADREST ASSEMBLY

   Click here

10. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    Click here

11. INSTALL REAR SEATBACK SPRING ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

12. INSTALL REAR SEAT LOCK BASE RH

    Click here

13. INSTALL REAR SEAT COVER CAP RH

    Click here

14. INSTALL REAR SEAT CLIMATE CONTROL ECU RH

    Click here

15. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Click here

16. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

17. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

18. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

19. INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Click here

20. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

21. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

22. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

23. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

24. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

25. CHECK SRS WARNING LIGHT

    Click here

26. CHECK REAR SEAT ASSEMBLY

    
    

    1. Check the power seat operation:

       Click here

    2. Check the climate control seat system:

       Click here

    3. Check the seat vibration system:

       Click here