REAR SEAT ASSEMBLY(for Ottoman) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY LH


    1. A000V2F

      Remove the 22 hog rings and rear seat cushion spring assembly LH from the rear seat cushion cover with pad LH.

  2. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH


    1. A000Z1P

      Remove the 15 hog rings and separate type rear seat cushion cover LH from the rear seat cushion pad LH.

  3. REMOVE REAR SEAT SHOULDER BELT GUIDE LH


    1. A000Y9J

      Remove the 3 screws and rear seat shoulder belt guide LH.

  4. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. A000X4W

      Remove the 2 pins and rear seat headrest assembly.

      Tech Tips

      Use the same procedure to remove the rear seat headrest assembly on the other side.

  5. REMOVE REAR SEAT HEADREST SUPPORT


    1. A000Y18

      Detach the 4 claws to remove the 2 rear seat headrest supports.

      Tech Tips

      Use the same procedure to remove the rear seat headrest support on the other side.

  6. REMOVE REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

    A000YLA

    1. Detach the wire harness clamp and disconnect the 2 connectors.

    2. Remove the 2 bolts.

    3. Detach the 2 claws to remove the rear No. 1 seat headrest adjuster sub-assembly LH.

      Tech Tips

      Use the same procedure to remove the rear No. 1 seat headrest adjuster sub-assembly on the other side.

  7. REMOVE POSITION CONTROL ECU ASSEMBLY

    A000USV

    1. Disconnect the 2 connectors.

    2. Remove the 2 nuts and position control ECU assembly.

      Tech Tips

      Use the same procedure to remove the position control ECU assembly on the other side.

  8. REMOVE REAR SEAT CLIMATE CONTROL ECU LH

    A000WNU

    1. Disconnect the 2 connectors.

    2. Remove the 2 nuts and rear seat climate control ECU LH.

  9. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY


    1. Disconnect the connector.

    2. Detach the guide and remove the seat heater control sub-assembly.

      Tech Tips

      Use the same procedure to remove the seat heater control sub-assembly on the other side.

  10. REMOVE REAR SEAT COVER CAP LH


    1. A000WT9

      Detach the 5 claws to remove the rear seat cover cap LH.

  11. REMOVE REAR SEAT LOCK BASE LH


    1. A000ZHU

      Remove the 3 screws and rear seat lock base LH.

  12. REMOVE REAR SEATBACK COVER WITH PAD LH


    1. Remove the nut and detach the seatback cover bracket.

    2. Disconnect the connector.

    3. Detach the 8 hooks and remove the 19 hog rings and rear seatback cover with pad LH from the rear seatback spring assembly LH.

      A000Y70E02
      Text in Illustration
      *1 Seatback Cover Bracket *2 Hook

  13. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH

    A000Z4B

    1. Remove the 10 hog rings and separate type rear seatback cover LH from the rear seatback pad LH.

  14. REMOVE REAR SEATBACK CLIMATE CONTROL BLOWER LH

    A000VRDE02
    Text in Illustration
    *1 Felt Pad

    1. Remove the felt pad.

    2. Disconnect the 3 connectors and detach the wire harness clamps.

    3. Remove the 3 nuts.

    4. Remove the 2 screws and rear seatback climate control blower LH.

  15. REMOVE REAR SEAT WIRE LH

    A000TLP

    1. Disconnect the 3 connectors.

    2. Detach the wire harness clamps to remove the rear seat wire LH.

  16. REMOVE REAR SEAT INNER BELT ASSEMBLY LH

    Click here

  17. REMOVE REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY LH


    1. A000V2H

      Remove the nut and rear seat belt inner anchor bracket assembly LH.

  18. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH


    1. A000YUS

      Remove the rear No. 2 seat cushion pad.

    2. A000V6Y

      Detach the 2 wire harness clamps and disconnect the 2 connectors.

    3. A000TYU

      Remove the 2 screws.

    4. Detach the 2 claws to remove the seat climate control controller LH.

  19. REMOVE AIR FILTER

    A000YO2

    1. Detach the 2 claws to remove the air filter.

      Tech Tips

      Use the same procedure to remove the air filter on the other side.

  20. REMOVE REAR SEAT CLIMATE CONTROL BLOWER LH


    1. A000VX9

      Disconnect the connector.

    2. A000Z2V

      Remove the 3 nuts and rear seat climate control blower LH.

  21. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY RH

    A000Y2ZE03
    Text in Illustration
    *1 Hook

    1. Using a clip remover, remove the clip.

    2. Detach the 2 hooks.

    3. Remove the 19 hog rings and rear seat cushion spring assembly RH from the rear seat cushion cover with pad RH.

  22. REMOVE REAR SEAT CUSHION PAD A


    1. A000WTL

      Remove the 2 nuts and rear seat cushion pad A.

  23. REMOVE REAR SEAT CUSHION PAD B


    1. A000Y34

      Remove the 2 nuts and rear seat cushion pad B.

  24. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH


    1. Remove the 18 hog rings and detach the 2 pieces of fastening tape.

    2. Detach the 10 claws to remove the separate type rear seat cushion cover RH.

      A000VEUE03
      Text in Illustration
      *1 Fastening Tape - -

  25. REMOVE REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedures described for the LH side.

  26. REMOVE REAR SEAT CLIMATE CONTROL ECU RH

    Tech Tips

    Use the same procedures described for the LH side.

  27. REMOVE REAR SEAT COVER CAP RH

    Tech Tips

    Use the same procedures described for the LH side.

  28. REMOVE REAR SEAT LOCK BASE RH

    Tech Tips

    Use the same procedures described for the LH side.

  29. REMOVE REAR SEATBACK CLIMATE CONTROL BLOWER RH

    Tech Tips

    Use the same procedures described for the LH side.

  30. REMOVE REAR SEATBACK COVER WITH PAD RH


    1. Remove the nut and detach the seatback cover bracket.

    2. Disconnect the connector.

    3. Detach the 7 hooks and remove the 20 hog rings and rear seatback cover with pad RH from the rear seatback spring assembly RH.

      A000XX0E02
      Text in Illustration
      *1 Seatback Cover Bracket *2 Hook

  31. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH


    1. Remove the 22 hog rings and separate type rear seatback cover RH from the rear seatback pad RH.

      A000U7L

  32. REMOVE REAR SEAT WIRE RH

    A000T8R

    1. Disconnect the 3 connectors.

    2. Detach the 11 wire harness clamps to remove the rear seat wire RH.

  33. REMOVE SUB SEATBACK PLATE SUB-ASSEMBLY


    1. A000YAP

      Detach the 2 claws to disconnect the 2 air hoses.

    2. Detach the 2 clamps to remove the upper part of the sub seatback plate sub-assembly.

    3. A000UD2

      Detach the 2 hose clamps to disconnect the air hose.

    4. Detach the 4 clamps to remove the lower part of the sub seatback plate sub-assembly.

  34. REMOVE REAR SEAT INNER BELT ASSEMBLY RH

    Click here

  35. REMOVE REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY RH


    1. A000Y4U

      Remove the nut and rear seat belt inner anchor bracket assembly RH.

  36. REMOVE SEAT CLIMATE CONTROL CONTROLLER RH

    Tech Tips

    Use the same procedures described for the LH side.

  37. REMOVE REAR SEAT CLIMATE CONTROL BLOWER RH

    Tech Tips

    Use the same procedures described for the LH side.

  38. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY (w/ Center Seat)


    1. Remove the 23 hog rings.

    2. Detach the fastening tape to remove the center seat cushion cover.

      A000V1NE02
      Text in Illustration
      *1 Fastening Tape - -

  39. REMOVE REAR CENTER SEAT CUSHION PAD (w/ Center Seat)


    1. Remove the rear center seat cushion pad from the rear center seat cushion frame.

  40. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (w/ Center Seat)


    1. A000WRR

      Remove the 2 bolts and rear center seat headrest assembly.

  41. REMOVE REAR SEAT ARMREST HOLE COVER (w/ Center Seat)


    1. A000UF5

      Detach the 2 clips to remove the rear seat armrest hole cover.

  42. REMOVE CENTER SEATBACK FRAME SUB-ASSEMBLY (w/ Center Seat)


    1. A000TZM

      Detach the wire harness clamp.

    2. Remove the 2 nuts and center seatback frame sub-assembly from the rear seat center armrest assembly.

  43. REMOVE TELEVISION SWITCH AND VOLUME ASSEMBLY (w/ Center Seat)


    1. Remove the television switch and volume assembly.

  44. REMOVE REAR NO. 1 SEAT CENTER ARMREST PANEL (w/ Center Seat)


    1. A000VUHE01

      Using moulding remover A, detach the 8 claws and 3 guides to remove the rear No. 1 seat center armrest panel together with the rear seat armrest hole board as indicated by the arrows in the order shown in the illustration.

    2. Disconnect the 2 connectors.

    3. A000Y1N

      Remove the 3 screws and rear No. 1 seat center armrest panel from the rear seat armrest hole board.

  45. REMOVE REAR POWER SEAT SWITCH (w/ Center Seat)


    1. A000W2G

      Remove the 4 screws and rear power seat switch.

  46. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (w/ Center Seat)


    1. A000W2Q

      Remove the 2 screws and rear seat center armrest cup holder sub-assembly.

  47. REMOVE SEAT VIBRATOR SWITCH (w/ Center Seat)


    1. A000WNH

      Remove the 2 screws and seat vibrator switch.

    2. Disconnect the connector.

      Tech Tips

      Use the same procedure to remove the seat vibrator switch on the other side.

  48. REMOVE HEADPHONE TERMINAL (w/ Center Seat)

    Click here