REAR POWER SEAT MOTOR ASSEMBLY(for Ottoman) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR SEAT WIRE LH

    A000TLP

    1. Attach the 11 wire harness clamps to install the rear seat wire LH.

    2. Connect the 3 connectors.

  2. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER LH

    Click here

  3. INSTALL REAR SEATBACK COVER WITH PAD LH

    Click here

  4. INSTALL REAR SEAT LOCK BASE LH

    Click here

  5. INSTALL REAR SEAT COVER CAP LH

    Click here

  6. INSTALL REAR SEAT CLIMATE CONTROL ECU LH

    Click here

  7. INSTALL POSITION CONTROL ECU ASSEMBLY

    Click here

  8. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    Click here

  9. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

    A000YLA

    1. Attach the 2 claws to install the rear No. 1 seat headrest adjuster sub-assembly with the 2 bolts.

    2. Connect the 2 connectors and attach the wire harness clamp.

  10. INSTALL REAR SEAT HEADREST SUPPORT

    Click here

  11. INSTALL REAR SEAT HEADREST ASSEMBLY

    Click here

  12. INSTALL SUB SEATBACK PLATE SUB-ASSEMBLY


    1. A000UD2

      Attach the 4 clamps to install the lower part of the sub seatback plate sub-assembly.

    2. Attach the 2 hose clamps to connect the air hose.

    3. A000YAP

      Attach the 2 clamps to install the upper part of the sub seatback plate sub-assembly.

    4. Attach the 2 claws to connect the 2 air hoses.

  13. INSTALL REAR SEAT WIRE RH

    A000T8R

    1. Attach the wire harness clamps to install the rear seat wire RH.

    2. Connect the 3 connectors.

  14. INSTALL REAR SEATBACK COVER WITH PAD RH

    Click here

  15. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER RH

    Click here

  16. INSTALL REAR SEAT LOCK BASE RH

    Click here

  17. INSTALL REAR SEAT COVER CAP RH

    Click here

  18. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY

    Click here

  19. INSTALL REAR SEAT CLIMATE CONTROL ECU RH

    Click here

  20. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Click here

  21. INSTALL REAR SEAT CLIMATE CONTROL BLOWER LH

    Click here

  22. INSTALL SEAT CLIMATE CONTROL CONTROLLER LH

    Click here

  23. INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY LH

    Click here

  24. INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY

    A000Z7DE04

    1. Connect the air duct to the vehicle body.

    2. Install the rear No. 2 seat adjuster assembly with the 4 bolts and nut.

      Torque:
      for bolt A
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      except bolt A
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Be careful not to damage the vehicle body.

    3. A000Y3WE05
      Text in Illustration
      *1 Protruding Part

      w/ Center Seat:

      Connect the anchor part of the rear center seat outer belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat outer belt to overlap the protruding part of the anchor bracket.

  25. INSTALL REAR SEAT RECLINING ADJUSTER ASSEMBLY RH

    A000W2I

    1. Install the rear seat reclining adjuster assembly RH with the 4 nuts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Connect the connector.

  26. INSTALL REAR SEAT CLIMATE CONTROL BLOWER RH

    Click here

  27. INSTALL SEAT CLIMATE CONTROL CONTROLLER RH

    Click here

  28. INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY RH

    Click here

  29. INSTALL REAR NO. 1 SEAT ADJUSTER ASSEMBLY

    A000VMUE06

    1. Connect the air duct to the vehicle body.

    2. Install the rear No. 1 seat adjuster assembly with the 4 bolts and nut.

      Torque:
      for bolt A
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      except bolt A
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Be careful not to damage the vehicle body.

  30. INSTALL REAR SEAT AIRBAG ASSEMBLY RH

    Click here

  31. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (w/ Center Seat)

    Click here

  32. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

  33. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

  34. INSTALL REAR CENTER SEAT CUSHION ASSEMBLY (w/ Center Seat)

    Click here

  35. INSTALL REAR SEAT CONSOLE BOX (w/ Rear Console Box)

    Click here

  36. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

  37. INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Click here

  38. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  39. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  40. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  41. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  42. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  43. CHECK SRS WARNING LIGHT

    Click here

  44. CHECK REAR SEAT ASSEMBLY


    1. Check the power seat operation:

      Click here

    2. Check the climate control seat system:

      Click here

    3. Check the seat vibration system:

      Click here