REAR POWER SEAT MOTOR ASSEMBLY(for Ottoman) INSPECTION

PROCEDURE

1. INSPECT REAR NO. 2 SEAT ADJUSTER ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Rear No. 2 Seat Adjuster Assembly)

      Check the operation of the rear No. 2 seat adjuster assembly.

      
      

      1. Apply battery voltage to the rear No. 2 seat adjuster assembly connector, and check that the rear No. 2 seat adjuster assembly operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → 13 (FWD) Battery negative (-) → 9 (BACK) Forward Battery positive (+) → 9 (BACK) Battery negative (-) → 13 (FWD) Backward

         If the result is not as specified, replace the rear No. 2 seat adjuster assembly.

2. INSPECT REAR NO. 1 SEAT ADJUSTER ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Rear No. 1 Seat Adjuster Assembly)

      Check the operation of the rear No. 1 seat adjuster assembly.

      
      

      1. Apply battery voltage to the rear No. 1 seat adjuster assembly connector, and check that the rear No. 2 seat adjuster assembly operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → 9 (FWD) Battery negative (-) → 13 (BACK) Forward Battery positive (+) → 13 (BACK) Battery negative (-) → 9 (FWD) Backward Battery positive (+) → 5 (ROUP) Battery negative (-) → 1 (RODW) Roll up Battery positive (+) → 1 (RODW) Battery negative (-) → 5 (ROUP) Roll down

         If the result is not as specified, replace the rear No. 1 seat adjuster assembly.

3. INSPECT REAR SEATBACK SPRING ASSEMBLY LH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Rear Seatback Spring Assembly LH)

      Check the operation of the rear seatback spring assembly LH.

      
      

      1. Apply battery voltage to the rear seatback spring assembly LH connector, and check that the rear seatback spring assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → 4 (RNFL) Battery negative (-) → 3 (RNBL) Forward Battery positive (+) → 3 (RNBL) Battery negative (-) → 4 (RNFL) Backward

         If the result is not as specified, replace the rear seatback spring assembly LH.

4. INSPECT REAR SEATBACK SPRING ASSEMBLY RH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Rear Seatback Spring Assembly RH)

      Check the operation of the rear seatback spring assembly RH.

      
      

      1. Apply battery voltage to the rear seatback spring assembly RH connector, and check that the rear seatback spring assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → 3 (RNFR) Battery negative (-) → 4 (RNBR) Forward Battery positive (+) → 4 (RNBR) Battery negative (-) → 3 (RNFR) Backward

         If the result is not as specified, replace the rear seatback spring assembly RH.

5. INSPECT REAR SEAT RECLINING ADJUSTER ASSEMBLY RH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Rear Seat Reclining Adjuster Assembly RH)

      Check the operation of the rear seat reclining adjuster assembly RH.

      
      

      1. Apply battery voltage to the rear seat reclining adjuster assembly RH connector, and check that the rear seat reclining adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → 4 (RBFW) Battery negative (-) → 3 (RBBA) Forward Battery positive (+) → 3 (RBBA) Battery negative (-) → 4 (RBFW) Backward

         If the result is not as specified, replace the rear seat reclining adjuster assembly RH.

6. INSPECT REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Rear No. 1 Seat Headrest Adjuster Sub-assembly)

      Check the operation of the rear No. 1 seat headrest adjuster sub-assembly.

      
      

      1. Apply battery voltage to the rear No. 1 seat headrest adjuster sub-assembly connector, and check that the rear No. 1 seat headrest adjuster sub-assembly operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → 5 (UP) Battery negative (-) → 1 (DOWN) Upward Battery positive (+) → 1 (DOWN) Battery negative (-) → 5 (UP) Downward

         If the result is not as specified, replace the rear No. 1 seat headrest adjuster sub-assembly.