LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  5. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE REAR SEAT CUSHION ASSEMBLY LH

    Click here

  8. REMOVE REAR SEAT CUSHION ASSEMBLY RH

    Click here

  9. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

  10. REMOVE REAR SEATBACK ASSEMBLY RH

    Click here

  11. REMOVE REAR SEAT SHOULDER BELT GUIDE LH

    Click here

  12. REMOVE REAR SEAT HEADREST ASSEMBLY

    Click here

  13. REMOVE REAR SEAT HEADREST SUPPORT

    Click here

  14. REMOVE REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

    Click here

  15. REMOVE POSITION CONTROL ECU ASSEMBLY

    Click here

  16. REMOVE REAR SEAT CLIMATE CONTROL ECU LH

    Click here

  17. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY

    Click here

  18. REMOVE REAR SEAT COVER CAP LH

    Click here

  19. REMOVE REAR SEAT LOCK BASE LH

    Click here

  20. REMOVE REAR SEATBACK SPRING ASSEMBLY LH


    1. Remove the nut and detach the seatback cover bracket.

    2. Disconnect the connector.

    3. Detach the 8 hooks and remove the 19 hog rings and rear seatback spring assembly LH (lumbar support adjuster assembly LH) from the rear seatback cover with pad LH.

      A000Y70E02
      Text in Illustration
      *1 Seatback Cover Bracket *2 Hook
  21. REMOVE REAR SEAT SHOULDER BELT GUIDE RH

    Click here

  22. REMOVE REAR SEAT CLIMATE CONTROL ECU RH

    Click here

  23. REMOVE REAR SEAT COVER CAP RH

    Click here

  24. REMOVE REAR SEAT LOCK BASE RH

    Click here

  25. REMOVE REAR SEATBACK SPRING ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.