INSTRUMENT PANEL SAFETY PAD DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 COMBINATION METER BRACKET

    A000X8A

    1. Remove the No. 1 combination meter bracket.

  2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

    A000YHV

    1. Remove the screw.

    2. Detach the claw and remove the No. 1 side defroster nozzle duct.

  3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    A000UZT

    1. Remove the screw.

    2. Detach the claw and remove the No. 2 side defroster nozzle duct.

  4. REMOVE NO. 1 HEATER TO REGISTER DUCT

    A000USL

    1. Remove the 3 screws and No. 1 heater to register duct.

  5. REMOVE NO. 3 HEATER TO REGISTER DUCT

    A000TIN

    1. Remove the 3 screws and No. 3 heater to register duct.

  6. REMOVE DEFROSTER NOZZLE ASSEMBLY

    A000W4Y

    1. Remove the 3 screws and defroster nozzle assembly.

  7. REMOVE NO. 2 HEATER TO REGISTER DUCT


    1. A000YP8E02
      Text in Illustration
      *1 Hose

      Disconnect the hose from the ion generator sub-assembly.

    2. Remove the 2 screws and No. 2 heater to register duct.

  8. REMOVE ION GENERATOR SUB-ASSEMBLY

    Click here

  9. REMOVE NO. 2 INSTRUMENT PANEL WIRE

    Click here

  10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

    Click here

  11. REMOVE NAVIGATION ANTENNA ASSEMBLY

    Click here

  12. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    1. Disconnect the connector.

    2. A000X4D

      Detach the 2 claws and remove the automatic light control sensor.

  13. REMOVE NO. 2 INSTRUMENT PANEL WIRE

    A000UBI

    1. Detach the 5 wire harness clamps and remove the No. 2 instrument panel wire.

  14. REMOVE NO. 1 INSTRUMENT PANEL PIN

    Tech Tips

    Use the same procedure to remove the No. 1 instrument panel pin on the other side.


    1. A000TAM

      Remove the screw and No. 1 instrument panel pin.

  15. REMOVE NO. 1 METER HOOD RETAINER

    A000ZN3

    1. Remove the 2 screws and 2 No. 1 meter hood retainers.

  16. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    A000YVNE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Detach the 4 claws and remove the No. 1 instrument panel register assembly.

  17. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    A000TJ8E01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Detach the 4 claws and remove the No. 2 instrument panel register assembly.