INNER REAR VIEW MIRROR INSPECTION

PROCEDURE

1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System, Adaptive HighBeam System)

   
   

   1. 

      Text in Illustration

      *1	Battery	*2	Black Colored Tape
      *a	Bright	*b	Dark

      Check operation of the electrochromic inner mirror.

      
      

      1. Connect the battery positive (+) lead to terminal 2 and the negative (-) lead to terminal 10.

      2. Attach black colored tape to the forward sensor to prevent it from sensing.

      3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

         Tech Tips

         When the environment is very bright, the antiglare operation may occur immediately after the tape is applied.

         If the result is not as specified, replace the mirror assembly.

2. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System, Adaptive HighBeam System)

   

   Text in Illustration

   *1	Battery	*2	Black Colored Tape
   *a	Bright	*b	Dark

   
   

   1. Check operation of the electrochromic inner mirror.

      
      

      1. Connect the battery positive (+) lead to terminal 2 and the negative (-) lead to terminal 10.

      2. Attach black colored tape to the forward sensor to prevent it from sensing.

      3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

         Tech Tips

         When the environment is very bright, the anti-glare operation may occur immediately after the tape is applied.

         
         

         • If the result is not as specified, replace the inner rear view mirror assembly.